Neulight

LED lights and floor sanding accessories.

Our store will be closing at and will re-open on

Neulight B2

Neulight for American Sanders model B2. Replaces existing shroud and light fixture with super bright 30 watt led panel. Housing milled from solid aluminum, made in the USA.

Product options

$114.00

FG Floortec Taifun

Neulight for the FG Floortec Taifun edger. 220v and over 3,200 lumens to brighten your workspace. Comes with the corresponding plug for the Taifun and a 100lb magnet on the back casing to easily attach the light where needed.

Product options

$189.00

Super 7 Neulight

Super bright 50 watt LED light with custom made aluminum housing for the American Sanders Super 7 edger. This light hard wires into your machine and replaces the push-in bulb connection. Easily installs in minutes with only a screwdriver and cutters. Aluminum is locally sourced and milled, and lights are assembled here in the USA.

Product options

$105.00

Neulight Flip

Neulight 30 watt LED for the Lagler Flip. Super bright light with solid aluminum machined housing. This light attaches and direct wires into the Flip edger without altering or making holes in the machine. Also available in 220v.

Product options

$115.00

Buffer Light (regular and XL)

5 super bright 10 watt LEDs shine all around your buffer so you can see without needing to move the light. Custom milled 1” thick aluminum housing, 7100 lumens of bright white light (6000+Kelvin). Comes with screws for attachment and connectors for direct wiring. Plug for power drive and spider included with XL version, and can be cut for direct wire applications. Operates on both 110v and 220v Made in the USA

Product options

$270.00

Belt Sander Light

Super bright LED light that direct wires into your Hummel, Floorcrafter, and other belt sanders. 220v only.

Product options

$145.00

Trio Neulight 220v

Super bright 220v LED light for the Lagler Trio. Mounts securely under the front handle with supplied bolts, and direct wires into the plug. You can even wire in two lights (one on either side of the handle) for twice the brightness!

Product options

$150.00

Buffer Skirt

Robust velcro buffer skirt that will fit most machines, including American sanders buffers, Lagler Trio, powerdrive etc. Skirt measures 3.5” tall and 70” in length

Product options

$30.00

Hardplates for multidisc sanders

Set of six (6) 5 inch plates for your multidisc buffer attachment. These plates will eliminate the need for a steel Velcro attachment, and attach to the multidisc with a grade 8 bolt. No more bent shafts or chewed up pads, and simply add an interface pad for a softer cut.

Product options

$230.00

Stainless Steel Wire Brush Set

Add some texture with our stainless steel wire brush set! Epoxy poured bases for extra strength in wire retention, high quality wave stainless steel wire to keep the edges sharp, and included 5/8” nut for polisher attachment. These wire brushes will attach directly to your aluminum hardplates on the multidisc attachment (Hydrasand or Bona Mulitdisc) or the Bona powerdrive or Pallman Spider using a high strength velcro. Available in 5” pucks in sets of 6, or single pucks in 5”, 6” and 7” All pucks have a center nut that will thread onto the shaft of a variable speed polisher (max speed 2,000 rpm). We recommend using them in conjunction with our aluminum plates on multi-disc attachments, as the shaft on the stock foam pads aren’t sturdy enough.

Product options

$90.00

Velcro Interface Pads

Heavy duty hook and loop interface pads. These are great for adding some cushion to your final sanding cuts. Excellent Velcro adhesion to any hook and loop sandpaper or mesh screen. Pads measure at 3/16” thick, and are currently available in 5”, 6” with or without holes, 7” for edgers or Pallman Spider and 8” for Lagler Trio. No foam filler, so less dish out and more robust lifespan. You can also double them up to create a softer cut.

Product options

$5.50

Diamond Discs

Steel plates with diamond abrasive made for your multidisc sander or edger. 5” are velcro backed, 7” are for bolt on edger application (requires super 7 stepped washer) Excellent for helping to remove factory finish. Edger disc comes in both 30 and 60 grit options. 5” set 30 grit only.

Product options

$230.00

Replacement Velcro

Replacement hook Velcro available in a peel and stick for your sanders, multisc attachments or edgers. Simply sand off the remaining hook on your pad for a foam palm sander pad, then peel and stick on a new hook pad over top. For steel plates, removing existing Velcro, clean with acetone and abrade before applying new.

Product options

$8.00

Bluetooth Hygrometer & Thermometer

App Control:This bluetooth digital hygrometer helps you easily monitor temp and humidity changes from up to 260FT away (no obstructions); App does not require user registration to better protect your privacy Data Storage and Export: This humidity temperature sensor features a 2-year data storage and export function; with the data history, you can gain insights into environmental conditions to make your plans of adding clothing, adjusting the humidifier etc. in advance High Accuracy: Designed with an advanced NTC temperature and humidity sensor, this Bluetooth room thermometer features high accuracy (+/-0.9°F and +/-2% RH) and sensitivity (10-second refresh) and while delivering a stable signal to your mobile phone

Product options

$14.95

Replacement LED Panel

Replacement led panels- edger light replacements come ready to install. Just remove the screws from the backing heat sink plate and screw in the replacement. Light kits for the buffer, belt sander and trio include single use applicator of high temperature silicone and tube of thermal paste. Buffer light kits include new led drivers as well.

Product options

$21.00